Sonoff Basic Box with cable gland
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Sonoff Basic wall mount enclosure with cable gland PG3
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 157
- Makes
- 2
- Views
- 1,489
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — NoDerivatives
[EN]
This is a wall mount enclosure for Sonoff Basic with cable gland PG3 and snap fit cover. Enclosure has been tested with Sonoff Basic R2
Enclosure is printed from PETG with layer height 0,2mm.
Enclosure outer size is (LxWxH) 96x37x28mm (without cable gland). Wall thickens is 1,5mm.
You will need:
- 1 x Sonoff Basic
- 1 x cable gland PG3 (M16x1,5 can be used as well, but you will need eventually make bigger hole)
- 2 x wood screw 3 x 16mm
-------------------------------------------------------
[CZ]
Toto je kryt pro Sonoff Basic s kabelovou vývodkou PG3 a zaklapávacím víčkem pro nástěnnou montáž. Kryt byl otestován se Sonoff Basic R2.
Kryt byl vytištěn z PETG s výškou vrstvy 0,2mm.
Vnější rozměr krytu je (DxŠxV) 96x37x28mm (bez vývodky). Tloušťka stěny je 1,5mm.
Budete potřebovat:
- 1 x Sonoff Basic
- 1 x kabelová vývodka PG3 (lze použít i M16x1,5, ale bude možná nutno trochu zvětšit díru)
- 2 x vrut 3x16mm