1 / 3
Anycubic Kobra 2 Pro Z-belt idler — image 1
1 / 3

Anycubic Kobra 2 Pro Z-belt idler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This solves issues with loose Z-belt, which can cause the nozzle to hit the print when printing over a large area.

Rating
5 / 5
Likes
117
Downloads
836
Makes
6
Views
4,477
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution

The model is parametric and customizable depending on what bearing you can get a hold of and what tolerances your printer has (press fit).

Hardware required:

2x ≥M4x20mm screws
1x M6x30mm screw (depending of the ID of your bearing)
1x M6 nut (depending on the ID of your bearing)
1x bearing 6x15x5mm (the model is parametric, so ID and OD can be adjusted depending on what you have at hand)

If this doesn't work try to factory reset, Then auto level. Also check out tramming the X gantry.  

Printed with:

Prusa mini+
0,6mm CHT Nozzle
0,5mm layer height

PLA

If you find this model helpful or want to sell the prints, consider giving me a small tip here.

Tags