Middle Foot for Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.71 – €0.87 net (excluding VAT)
For file: Middle Foot_0.4n_0.2mm_PETG_MK3S_49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.79 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 49.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For 8x3mm magnet's
- Rating
- 4.909 / 5
- Likes
- 46
- Downloads
- 233
- Makes
- 15
- Views
- 850
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Just like the middle foot from BuildX but with holes for 3pc. of 8x3mm magnet's instead of the double-sided tape.
I have also added 1mm in high because the foot from BuildX was the exact same high like the original feet from the enclosure but this feet is on the middle of the enclosure and not on the outer frame. So you have to add the thickness of the frame to get all feet on the same level. When you turn around your enclosure and have a look at the bottom you will understand.