1 / 4
Aluminium profile holder for Boaxel shelving — image 1
1 / 4

Aluminium profile holder for Boaxel shelving

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder to attach a 40x10mm L aluminium profile to Ikea BOAXEL shelving system.

Rating
0 / 5
Likes
6
Downloads
26
Makes
0
Views
481
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Share Alike

This allows attaching an aluminium profile to the Ikea BOAXEL shelving system, to allow hanging tools or containers near the wall.

Extra material

  • 40x10mm L-shape aluminium profile, 2mm thick. Length depends on you.
  • M3x10 screws (2 per upright)
  • M3 heat-set threaded inserts (2 per upright)
  • M3 washers (if you don't print your own)

Instructions

  • Print one holder for each BOAXEL upright you want to attach a profile to
  • Put M3 heat-set inserts in the holes
  • Put the holders in
  • Print the guide, and use it to mark hole positions in the profile
  • Drill holes using a 3mm bit
  • Screw it in. Use M3 washers; if you run out like I did, print those too

Sources

https://github.com/encukou/3d/tree/master/boaxel-bar-holder