Modular Thread Organizer!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Expandable setup to store all those thread balls!
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 39
- Makes
- 0
- Views
- 564
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Update 3/12/24
I have added a spool that fits on the smaller diameter thread organizer. Just giving more options for different configurations!
GREAT BALLS OF FIRE!
So many balls of thread and no good way to store them! Now there is an expandable storage system that can fit almost any size container!
Print off the pieces you need and click them into place! They are made with tight tolerances so make sure your printer is tuned.
I have also included a printable spool to use if/when one is damaged. This also comes with a cap to use as a label for the color (it sits in the top so you can swap them out as needed). To wrap the thread around the spool, tie a not in the thread and insert it into the slot then slowly wrap the thread around the spool.
There are 2 different sizes included. One style has a significant sized hole in the bottom of the ball (roughly 32mm wide) and the other has virtually no supported core (see pictures) so MAKE SURE YOU PRINT THE RIGHT ONE!
*You can swap out/mix and match though so feel free to do so
*Each piece is in a specific location so make sure you are paying attention to which pieces go where (see photo for layout reference…it can get confusing. Remember: male ends go right and up, female ends go left and down)
I printed on a Bambu P1P @ 0.2 layer height w/ no supports