NASA Astronaut/Space Suit Patent Art
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall display plate for the astronaut space suit patent by NASA from 1973.
- Rating
- 4.778 / 5
- Likes
- 364
- Downloads
- 710
- Makes
- 12
- Views
- 4,292
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
2D plate / wall display for the astronaut space suit patent by NASA from 1973. Reflects designs from the later Apollo missions (15-17) as well as the Skylab suit.
Inspired by Ken Mills' patent art 2D plates (https://www.printables.com/@nightfallvt ), I decided to make one of my own. Check out his designs for similar work. I made my plate to be the same dimensions as his and other makers' wall plates (the odd dimensions of 192.71mm x 128.19 mm).
The frame in the photos is another one of my models, found here: https://www.printables.com/model/627868-2d-plate-patent-art-wall-frame
You can also use any other of the various plate frames of the same size on Printables, including ones with LED backlights, assuming you print the background in a light colored PLA.
Printing Instructions:
- Recommended: Infill: 100%, 0.25mm nozzle, 0.12mm layer height, slower printing
- I would recommend sticking with the 0.25mm nozzle, as the details at 0.12mm/0.10mm are much cleaner vs a 0.4mm nozzle at 0.15mm/0.10mm. Printing with a 0.4mm will make most of the text illegible and make everything much fuzzier (though will print 5x faster).
- The black background with white text was printed with 0.25mm, looks clean
- The white background with black text was printed with 0.4, looks blurrier
- I printed using Input Shaper because I am impatient, but I would recommend printing slower using the non-IS profiles, as you will get much better details. Slower will also preventing stringing on the text/graphics.
- The gcode I included specifies a swap at the 1.16mm mark. I printed the bottom in 1mm in black PLA, and the text/graphics in white PLA. You can swap them to do the standard black-on-white, or whatever color combo you want.
- When the print is finished, allow for the bed to fully cool! Otherwise your plate will warp.
Thanks!