1 / 2
16mm 110 film development spiral
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AP and Paterson tanks 16mm and 110 film development spiral
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 129
- Makes
- 0
- Views
- 1,068
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Overview
Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks.
- Up to 1.7m film length
- Up to 3 spirals in the 2x135 tank
- 16mm, 110 Instamatic, 2x8mm film format
- 250ml working solution
Printing
The bottom spiral printing withouts supports. The top part needs some support in the center. After the printing I used the lighter to heat the threads, tightened it shortly and made them fit smoothly.
Test print is made from PLA but I will use the nylon or PETG later.
Usage
- Unscrew the top part.
- Insert one end of the film into the slot.
- Screw the top part.
- Rotate the spiral counter-clockwise and lay the film in it.
- After the developing no need to unscrew the top, just pull out the film.