BLINK 4 outdoor Snap on cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
(UPDATE 2025 - Do Not Use as is - see description) This is a basic, snap on cover for your Blink 4 outdoor Camera
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 189
- Makes
- 0
- Views
- 1,289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
<UPDATE July 2025>
- Feel free to use the measurements, may ppl report that the motion detection and “nightvision” is not working when the cover is on. I use them as sensor detedtion in the condo with white cover and I have no issues, but i want to inform the community, its not cool to waste time and filament for something not working. At least the dimensions are fine. Hope you can use it.
</UPDATE July 2025>
Model dimensions:
• Length: 71.4mm / 2.8 inch
• Height: 71.4mm / 1.16 inch
• Depth: 40.5mm / 1.6 inch
Print settings:
• Layer height: 0.2 mm
• Outer walls/perimeters: 1
• Bottom layers: 2
• Top layers: 2
• Infill 15%
• No supports
• Plate adherence: Brim