Case for LPV 60 24 Meanwell Powersupply
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the LPV 60 24 powersupply.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 87
- Makes
- 0
- Views
- 444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A simple case for LPV 60 24 Meanwell Powersupply for a standing installation to use the convection effect for cooling. Don't disturb the air flow of the slots in the case. It might be a good idea to print it in flame retardant PET. Check the temperatures during operation of the powersupply with the real load connected
Mains voltages can be lethal. Use at your own risk.
4x M2 5mm DIN 912 screw
4x M2 D3,5-L3,6 hot melt nut
2x D03-08-0406 hot melt nut
2x M3 5mm DIN 912 screw
2x PG-7 cable gland
1x Switch 12,2x19,2mm
2 wood screws to fix the case on a shelf
Print: Add manual supports for the big holes. The rest should print without supports. Put the seams of the layer change on the inside of the case.