1 / 2
Dehydrator filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Activated carbon filter added to the top of my presto dehydrator I use to dry filament and desiccant.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Activated carbon filter added to the top of my presto dehydrator I use to dry filament and desiccant. The bottom fits over the exhaust vents of this dehydrator and funnels air through the filter material. It helps a bit with PLA smells but I'd advise to vent ABS/ASA and other toxic filaments outside.
- cut multiple carbon filters to 116mm x 116mm (jig included)
- pack up to 20mm into the top top of filter box
- slide lid into place and secure with one m3 x 10mm screw
- potentially add duct tape to the bottom for extra grip on the top of the
Print Settings
Printer: Prusa i3 MK2S
Supports: Yes
Resolution: 0.2mm
Infill: 15% gyroid
Filament: eSun ABS Grey
Notes:
Printed in ABS for better heat resistance