1 / 2
Lamp base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement desk clamping lamp base to move away from wall.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 46
- Makes
- 0
- Views
- 1,662
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My cheap desk lamp came with a base that clamps onto the side of the desk. Unfortunately, that clamp places the lamp off the side of the desk so I couldn't use it with my workbench against the wall. I made this replacement base to move the lamp forward enough to freely rotate.
- designed for 12mm lamp posts (seems to be common)
- two m4 hex nuts slot into base
- two very long m4 screws pull together (I used m4 x 65mm)
- glue notch onto bottom of base (aligning & clamping with shorter m4 screws helps)
- optional m4 x 20mm socket cap to lock lamp post (hex nut drops into slot inside lamp post hole)
Print Settings
Printer: Prusa Mini
Supports: Yes
Resolution: 0.2mm
Infill: 15% gyroid
Filament: Hatchbox ABS Black