1 / 6
(FAN DUCT SOLUTION FOR KP3S PRO V2) Ducto de ventilación para KP3S Pro v2 — image 1
1 / 6

(FAN DUCT SOLUTION FOR KP3S PRO V2) Ducto de ventilación para KP3S Pro v2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

(Mod to solve delamination and weak prints) Mod para resolver delaminación y piezas débiles.

Rating
5 / 5
Likes
21
Downloads
308
Makes
1
Views
1,323
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

##################### ENGLISH #######################

📁Files included: 

  • STL and STEP files for kp3s pro v2 original fan
  • STL and STEP files for 5015 8500 RPM Gdstime fan* (https://es.aliexpress.com/item/32865977791.html?spm=a2g0o.productlist.main.7.4a4f5ee2IUnZoP&algo_pvid=92bc00be-855c-4508-b248-b2f0e5352ff5)

*: the fan has an XH2.54 pin and needs to be changed to fit the Kingroon board

Since I had the kp3s pro v2 I encountered various problems related to layer adhesion, leading to print failures as soon as the layer fan kicks in.

To address this, I created a mod for the fan duct that redistributes the airflow so it doesn't hit the top of the nozzle directly but slightly below it. You should be able to screw directly into the duct.

------------------------Problems solved so far-----------------------------

 

🌡Printing temperature with PLA 

Temp towers with other ducts in PLA went from 245°C to 230°C. With lower temperatures, the prints failed, and even with high temperatures the prints showed delamination and were very fragile in general.

With this new duct, I was able to complete a normal temperature tower from 200°C to 195°C without issues. The print's toughness improved as well.

🏁Max volumetric speed with PLA

During the max volumetric speed test, I reached  3 mm^3/s.

With the new duct, I can reach 13.5mm^3/s.

-------------------------------------EXTRA NOTES-------------------------------------

Printing compatibility

  • PLA ✅
  • ABS ✅ (recommended)

 

##################### ESPAÑOL ########################

📁Archivos incluidos: 

  • Archivos STL y STEP para ventilador original de kp3s pro v2
  • Archivos STL y STEP para ventilador 5015 8500 RPM de Gdstime* (https://es.aliexpress.com/item/32865977791.html?spm=a2g0o.productlist.main.7.4a4f5ee2IUnZoP&algo_pvid=92bc00be-855c-4508-b248-b2f0e5352ff5)

*: el ventilador viene con el pin XH2.54 y se necesita cambiarlo para coincidir con la placa de Kingroon

Desde que adquirí la impresora kp3s pro v2 empecé a tener problemas de adherencia entre capas y las impresiones fallaban al iniciar el ventilador de capa.

Para solucionarlo cree un mod para el ducto de ventilación que redirige el aire no directamente a la boquilla, sino ligeramente abajo de ella. Los tornillos de la impresora deberían funcionar bien directamente enroscados en el ducto.

-----------Problemas solucionados hasta ahora con el mod------------

 

🌡Temperatura de impresión con PLA 

Las torres de temperatura con otros ductos en PLA iban de 245°C hasta 230°C, a temperaturas menores las impresiones fallaban. Aun con esas altas temperaturas para PLA las piezas presentaban delaminación y eran bastante frágiles en general.

Con este nuevo ducto pude completar una torre de temperatura normal de 220°C hasta 195°C sin problemas. La dureza de las impresiones también mejoró.

🏁Velocidad volumétrica máxima con PLA

Con test de velocidad volumétrica máxima obtenía unos 3 mm^3/s como máximo. 

Con el nuevo ducto obtengo hasta 13.5mm^3/s lo que es habitual para un PLA normal.

-----------------------------------------NOTAS---------------------------------------

Compatibilidad de impresión

  • PLA ✅
  • ABS ✅ (recomendado)

Tags