Joint for Flag on Bike Trailer
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.56 – €3.13 net (excluding VAT)
For file: FahrradanhaengerFahnenhalter_v1.0_0.4n_0.2mm_PETG_MINI_3h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.84 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 3.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
With this joint, the safety flag of a bike trailer can be folded down.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Our bike trailer did not come with a flag, which is a safety hazard because cars or truck might overlook it. Therefore, I wanted to attach a flag to the trailer, but with a fixed attachment, the trailer would not fit through the basement door.
This joint allows for the flag to be folded up or down by loosening a single butterfly nut. It's intended for a trailer beam of 25 mm diameter and a flagpole of 6 mm diameter.
Additional Material
- 1 M6 hex-head bolt with a length of >44mm
- 1 M6 butterfly nut
- 2 appropriate washers
Print standing on it's side with supports.