1 / 2
MOE AAA & CR2032 Grip Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries.
- Rating
- 4 / 5
- Likes
- 29
- Downloads
- 217
- Makes
- 3
- Views
- 877
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MOE AAA & CR2032 Grip Insert by Qwerm
An insert for a Magpul MOE grip that holds one CR2032 and three AAA batteries.
Print Orientation: Print everything on it's flat side (facing up for the base, facing down for the cap).
Settings used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 100%
For the cap use the following support:
Support Structure: Tree
Tree Support Branch Angle: 50
Support Placement: Touching Buildplate