Tein EDFC Mount for FRS GT86 BRZ
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy way to mount your active suspension controller.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 53
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I designed this mount to hold the EDFC controller from tein. you will need 3 small screws to mount it to the dash.
Designed to print with no supports.
Slanted model angles the controller to be more level for the gyro.
To install simply remove the head unit trim and remove the corner on the passenger side to allow the cable to pass through. You must attach the mount to the trim first and then install the controller by using three of the original body screws to pass through the mount from the back.
Note. The screws are barely long enough so multiple removing it multiple times will strip out the mount.
Thanks for checking this out.