DAY OF THE DEAD HUEFORGE STUDY02 – 8 COLOURS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Continuing my study with Hueforge
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 27
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BAMBULAB BRONZE Transmission Distance: 2
PLA+ Sunlu Red Transmission Distance: 1.5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA+ Sunlu Green Transmission Distance: 3
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ eSUN Light Blue Transmission Distance: 3.5
PLA+ Sunlu Pure Yellow Transmission Distance: 3.5
PLA+ Sunlu White Transmission Distance: 3
Swap Instructions:
Start with BRONZE
At layer #4 (0.4mm) swap to Red
At layer #5 (0.48mm) swap to Orange
At layer #7 (0.64mm) swap to Green
At layer #9 (0.8mm) swap to Blue
At layer #12 (1.04mm) swap to Light Blue
At layer #17 (1.44mm) swap to Pure Yellow
At layer #21 (1.76mm) swap to White for the rest.