NEW! AMS-X Stand for all AMS units
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two different stands for two different versions of the AMS. See below.
- Rating
- 5 / 5
- Likes
- 123
- Downloads
- 497
- Makes
- 4
- Views
- 4,993
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NEW VERSION supports both AMS stand types
I have a new version that supports both AMS (4-slot and 3-slot) stands. Please go to
https://makerworld.com/en/models/51650#profileId-53374
to learn more.
I know I wanted an AMS stand to free some room on my desk and after reviewing every stand I could find, I realized I'd need to build one myself. BUT… I did find one that was close to what I wanted. It's the AMS stacking stand for P1P and X1 by MihaiDesigns.
I really liked the way the top of the stand fit snuggly into the bottom of the AMS. I didn't like the fact the back wasn't there and you had to purchase metal tubing and fasten it yourself if you wanted it sturdy. Also, I knew I wanted a different look for the stand as well.
So, in Blender, I cut off everything but the mounting teeth on top. I then created a different design but kept the same height and same dimensions. I next added a back brace to make it as sturdy as possible. Everything is ready to print in the 3mf including 4 hand-tightened bolts and the X-brace internal screw bolt. There are spring clips designed to work in PLA that reinforce the X-brace. There are some finger notches in the bottom to make it easy to lift the whole thing with the AMS.
Print in PLA with no supports.
I should mention there is a test print (see plate image above) so that you can test to see if the “teeth” will fit properly in your AMS. Might be a good idea to print it out.
Had a lot of fun making and printing it.