1 / 4
Halter SONOFF SNZB-01 Zigbee Wireless Switch [Holder SONOFF SNZB-01 Zigbee Wireless Switch] — image 1
1 / 4

Halter SONOFF SNZB-01 Zigbee Wireless Switch [Holder SONOFF SNZB-01 Zigbee Wireless Switch]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Einfacher Wandhalter für den SONOFF SNZB-01 Zigbee Wireless Switch Simple wall mount for the SONOFF SNZB-01 Zigbee

Rating
0 / 5
Likes
3
Downloads
49
Makes
0
Views
403
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Einfacher Wandhalter für den SONOFF SNZB-01 Zigbee Wireless Switch

Ich habe hier eine einfachen, schnell zu druckenden Halter für einen SONOFF SNZB-01 Zigbee Wireless Switch entworfen.

Er wird mit zwei Senkkopfschraube an der Wand befestigt.

Im Bereich der Anschraubbohrungen kann des Modell beim Slicen noch verstärkt werden (dickere Wandstärke oder Vollmaterial) falls dieses gewünscht / erforderlich ist. Ich habe bei mir den Bereich als Vollmaterial gedruckt, dann ist das Modell nicht so empfindlichen wenn man die Schraube zu fest anzieht.

 

________________________________________________________________________________________________________________

 

Simple wall mount for the SONOFF SNZB-01 Zigbee Wireless Switch

I have designed a simple, quick to print bracket for a SONOFF SNZB-01 Zigbee Wireless Switch.

It is fixed to the wall with two countersunk screws.

In the area of the screw holes, the model can be reinforced during slicing (thicker wall or solid material) if this is desired / required. I have printed the area as solid material, then the model is not so sensitive if you tighten the screw too much.

Tags