1 / 4

Flex3Drive Railcore II Custom for Mosquito Hotend

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel.

Updated at source: Oct 28, 2023

Model information

This pack contains my customized Flex3D mount for Railcore II.

It contains:

-G5 base with integrated mounting bracket

Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel.

Also integrates a BL-Touch mount

-G5 Cap with extra support for the PTFE tube

-Extra high, 3-dots tension arm with 0.2mm more preload than the 2-dots one for very small filaments

-Stepper coupler with added flat for better grip on the axle with less tension on the screw

-Mosquito inserts to prevent the mount to creep into the mosquito's oblong locators when hot

-Stock G5 top, motor clamp and motor cap; just so you have them

-Custom 5150 part cooling fan shroud to accommodate for the higher nozzle

Visit https://flex3drive.com/ to get your remote extruder kit!

Printer:

Railcore II ZL

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.14

Infill:

Filament:

generic CF-PETG or PA

black

Notes:

Try to print the base, top and cap in higher resolution; I used 0.14

The tension arms can be 0.2mm, Cura's tree supports work amazing

All the remaining coupler, clamp, motor cap can be printed for strength 0.2+

Category: 3D Printer Extruders