1 / 1
The Interloper - Outer Wilds (Hueforge)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Interloper from Outer Wilds
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 17
- Makes
- 0
- Views
- 828
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA Protopasta Cobalt Blue Transmission Distance: 5
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Cobalt Blue
At layer #11 (0.96mm) swap to Sapphire Blue
At layer #14 (1.2mm) swap to Pastel Ice
At layer #21 (1.76mm) swap to White for the rest
Scaling the X and Y is fine, but do not scale the Z.