1 / 4
Gridfinity dashboard module for knobster rotary encoder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity dashboard module for knobster rotary encoder
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 498
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity dashboard module for knobster rotary encoder
Requires interface plates and magnets to connect to a Gridfinity base plate.
Requires 1 x m3 heat set insert and 1 x m3 x 12 countersunk hex bolt.
Print the bracket on the side and the clamp with the top on the printbed.
No support material needed.
For the bracket, set ‘top shell thickness’ to 10mm.
This is for the heat set insert to melt into.
I used adaptive cubic infill pattern for the bracket.
I used PLA with a 0.2mm layer height and with a 0.4mm nozzle.
Included is the f3d file