DOLCE GUSTO CAPSULE DISPENSER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very simple and functional dispenser allowing you to store 3 different types of coffee or cappuccino or not.
- Rating
- 4.75 / 5
- Likes
- 123
- Downloads
- 1,113
- Makes
- 12
- Views
- 3,973
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Very simple and functional dispenser allowing you to store 3 different types of coffee or cappuccino or not.
The idea came up after seeing the absurd prices they ask for an item like this and also because of my stubbornness, I wanted to see if I would be able to make a piece that was completely mine and functional.
No support of any kind is required.
The first layer must be smooth and firmly attached to the heatbed, otherwise the end of the print may not be completed as the piece gets higher.
If it is not to be used only with original Dolce Gusto capsules (compatible capsules are slightly larger) it is necessary to increase the STL by 2% before using the slicer and converting it to g-code.
It looks good on PLA or PETG and in order to print faster, layers of 0.20 or 0.30 work very well.