1 / 1
My Keys key hanger/holder/hooks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A beautiful key hanger using words My Keys.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 62
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Key hanger (holder, hooks) using words "My Keys".
Print Settings
Material: PLA
Layer height: 0.2 mm
Perimeters: 3
Top layers: 3 layers
Bottom layers: 3 layers
Infill: 25%
Supports: yes (just for holes)
Ironing: optional (for smoother top)
Print Instructions
Print is easy, use supports for screw holes and optional ironing for top-most layers only to make it smoother. There is a 3mf for BambuStudio/OrcaSlicer with everything set up.
Print 7x peg, one my part and one keys part. Use a contrast/different color for pegs to make it nicer.
Assembly
You'll need:
- 4 wall plugs (4mm x 25mm)
- 4 black wood screws (3.5mm x 22mm)
- 7 wood screws (3.5mm x 22mm)
Steps:
- Remove supports.
- Screw in the pegs from behind.
- Position it on a wall and mark the holes.
- Drill the holes and insert the wall plugs.
- Screw it in.
- Enjoy!