Parametric Apple II expansion card storage box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage box for spare apple II cards. Parametric so if you have a bunch of short cards you can make a smaller box.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 53
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Parametric box and lid for storing Apple II expansion cards (could probably be adapted for any expansion cards that are similar.
The slots hold the “fingers” of the cards. The current tolerance is a bit loose so they are easy to get in and out, but you might want to make it tighter if for example you were shipping the box.
Edit the spreadsheet in the freecad file to tell it your longest card, the size of the “tail”, how many and the tallest card height.
The first photo shows the included STL file for a box that can hold up to 4 7" long cards (the one in the photo is an apple serial card, the others are shorter, a disk controller and a z80 card.
The purple box was one I made for a bunch of TJ Boldt ROM drives.
Update: just added STL's for a single Transwarp card