1 / 1
16mm Minolta Plustek Carrier
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of @Shred_40965 Plustek OpticFilm holder To suit Minolta 16mm film
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 53
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Copied from original model. Has been printed and tested.
Printing
I recommend to use matte black filament, to reduce scatter lights from the scanner lamp while scanning. No need to use supports, but use brims if your filament is prone of warping.
I only had a small number of film strips to scan, and the holder did a good job. However, for a larger number you may want to do some minor improvements. The film strip shifts around in the holder, so probably some registration pins should be added to hold it in place.