Ikea Gorm Storage Rack Riser - Roomba height
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Riser to add enough height below storage for a roomba to make it under.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Riser to add enough height below Ikea's Gorm series storage racks for a roomba to make it under the bottom shelf.
Without the riser, the first floor is just over the ground. If you put the shelves in the second rung there's a good 1-2" more than necessary. This riser gives room plus about 0.5" of extra clearance without sacrificing precious storage space.
Holes for drainage keep the wood dry and rot free, four nubs create a snug friction fit.
Suggested to print with PLA+ with Strength settings.
Likely works with Hejne Series to (with a bit of extra space) but I haven't tested it.