1 / 7
Belt Tensioner for 20 x 20 Extruded Aluminum — image 1
1 / 7

Belt Tensioner for 20 x 20 Extruded Aluminum

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The following tensioner was created for use with 20 x 20 V-Slot Linear Rail (http://openbuildspartstore.com/v-slot-…

Rating
0 / 5
Likes
5
Downloads
34
Makes
0
Views
228
Reviews
0

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

The following tensioner was created for use with 20 x 20 V-Slot Linear Rail (http://openbuildspartstore.com/v-slot-linear-rail/). The design was inspired by Belt tensioner pulley for Tevo Tarantula by Banholm (http://www.thingiverse.com/thing:1704100), published Aug 4, 2016

Currently the design show the use of 3 low profile screws which might be an overkill if you use all three. I wanted to provide flexibility in the design to allow for multiple mounting configurations, however using the center tap of the extrusion should be enough.

In addition the tensioner is design to slip over the end of the 20 x 20 V-Slot Linear Rail at a depth of 20mm.

Print Settings

Printer:

AFINIBOT CREALITY PRO

Rafts:

Yes

Supports:

Yes

Resolution:

.01

Infill:

80%

Post-Printing

Hardware

4 3mm x 12mm Rounded Head Screws
1 3mm x 16mm Rounded Head Screw

1 3mm x 30mm Rounded Head Screw

7 x 3mm hex nuts

1 x 3mm Spacer

1 x 606-2RS Bearing

3 x 5mm Low Profile Screws

2 x 5mm Tee Nuts

Category: 3D Printer Accessories

Tags