Zip tie anchor (parametrized)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.33 – €0.40 net (excluding VAT)
For file: anchor_0.2mm_PETG_MINI_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 24 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple zip tie anchor with parametrized source file.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 127
- Makes
- 1
- Views
- 541
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Simple zip tie anchor, the dimensions are in the attached image. I would attach it with 2 pieces of 10mm double sided tape.
There's also the original Fusion360 file where parameters can be adjusted easily (google "fusion 360 change user parameters" if you don't know what am I talking about).
No supports or any special care needed for printing.