Trianglelab Dragon Hotend v2.0 Bear MK3S Extruder Cover Rigid Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.96 – €2.40 net (excluding VAT)
For file: dragon_extruder_cover.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.18 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 2.55 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I took the great idea of two models and made a single piece that can be printed to accommodate the Dragon Hotend.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 239
- Makes
- 2
- Views
- 3,481
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I used the Triangle Labs Dragon Hotend v2.0.
The hotend comes with m2.5x8 (4x) and m2.5x5 (2x) I use the m2.5x5 on the front and the m2.5x8 in the back. This is because the threads do not go all the way through the hotend so you need them to be the right length.
You will also need a 35mm piece of PTFE. I have created a PTFE cutting guide too.