1 / 5
Print-in-Place Hinge Clamp Assortment [20-100mm]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Assortment of cylindrical clamps with a print-in-place hinge. Can be used as stopper ring, etc.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 352
- Makes
- 0
- Views
- 1,461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Assortment of cylindrical clamps with a print-in-place hinge. Can be used as stopper ring, etc.
- The inner diameter ranges from 20mm to 100mm in 1mm steps.
- To make the print-in-place hinge work, a certain gap inside the hinge is needed. As different printers have different accuracy, all clamps are available with 0.2 to 0.5mm gap in 0.1mm steps. e.g. When printing the hinge on my Anycubic i3 Mega, a 0.4mm gap works best.
(Makes 4*80=320 stl-files :D)
File Names:
hinge_clamp_gapXX_diYY.stl
where:
- XX stands for the print-in-place gap ranging between 0.2m and 0.5mm in 0.1mm steps.
- YY stands for the inner diameter of the clamp ranging between 20mm and 100mm in 1mm steps.
Screw:
The clamp is tightened with a wood screw. The screw diameter depends on the inner diameter (di) of the clamp.
- di 20 to 29mm: screw diameter 3.5mm
- di 30 to 39mm: screw diameter 4mm
- di 40 to 59mm: screw diameter 4.5mm
- di 60 to 79mm: screw diameter 5mm
- di 80 to 100mm: screw diameter 6mm
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: basicfil PLA blue
Category: DIY