Flexible Dust Collector for Drill (Eurohals)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This dust collector attachment mounts on every drill/CNC machine with an "eurohals" neck (diameter 43mm)
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 257
- Makes
- 2
- Views
- 1,165
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This dust collector attachment mounts on every drill/CNC machine with an eurohals neck (diameter 43mm). The nozzle section is made of flexible segments that allow to adapt it for multiple purposes. Bend it towards your drill bit, rotary wire brush, etc.. Add or remove segments to your own liking to change its length. The plug for the vacuum hose is for standard 35mm hoses.
Additional material:
For tightening the neck ring, you need:
- 1x hex screw M5x20
- 1x butterfly nut M5
Design:
The flex segments were highly optimized in CAD so that high curvatures can be attained while 3D printing without support is possible.
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.15mm or finer
Infill:
100% for the flex segments, 25% for the body.
Filament:
basicfil PETG
Notes:
This thing is favorably printed in PETG for 2 reasons:
1) As the flex segments should stay together tightly, material creep must be avoided. Creep over time would loosen the connection and the segments would not stay in position anymore. PETG is supposed to creep less than PLA.
- When snapping the flex segments together, the female part is bent open and prone to crack at that moment. PETG has a higher fracture strain than PLA so it is better for that purpose.
I designed the flex segments so that they print well and at the same time snap well without cracking.
Category: Hobby