Skadis T-Nut ring with 18mm inner diameter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.23 – €0.28 net (excluding VAT)
For file: Skadis ring 18mm ID part-Part_0.4n_0.15mm_PETG_MK4IS_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 19.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An 18mm ring with a Skadis T-Nut mount.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v2.0
This is a horizontal ring with an inner diameter of 18mm for mounting on the IKEA Skadis board. The included freecad file should be parametric enough to create any other sizes required.
I use it to secure the end of a digital caliper, to prevent it from falling even if it is knocked off the hooks at the head end.
It uses the Skadis T-Nuts mounting system from 6d6178. You will need only one nut and the M2.5 hardware to attach it. I use an M2.5x16 screw.
No supports are needed when printed in the upright orientation.