1 / 1
Chamber thermistor holder for voron 2.4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy fix on the back of print plate. /!\ Double check position! It must be align with cable chain.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 75
- Makes
- 1
- Views
- 1,415
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We use thermistor from old E3D V6 hotend.
Klipper config is :
[temperature_fan chamber]
pin: PD13
max_power: 1.0
shutdown_speed: 0.0
kick_start_time: 5.0
cycle_time:0.01
off_below:0.1
sensor_type: NTC 100K beta 3950
sensor_pin: PF5
min_temp: 0
max_temp: 70
target_temp: 35.0
control: watermark
gcode_id: C