1 / 2
Air Line to Garden Hose Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect Air Line to Garden Hose
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 232
- Makes
- 2
- Views
- 925
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed adapters to blow the water out of my garden hose and outside hose connection before the winter freeze. Created a male and female adapter that accepts a standard ¼" NPT Airline fitting.
Using my air compressor running at about 20 psi, I was able to clear all the water from hoses and piping to prevent freezing.
- PLA
- 0.4 mm Nozzle
- 0.12 Layer Height (could likely use 0.20)
- 80% Cubic Subdivision Infill (probably overkill)
- No Supports when printed tapered end down
