JBL Control One - reinforced mount shutter screw
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.47 – €3.02 net (excluding VAT)
For file: CE2_2x-JBL-screw-narrowed_for_Ender_2_Pro_PLA.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.75 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remixed JBL Control One Shutter Screw mount with some fixes
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit:
Instead of printing the screw, you should have a look at this mount implementation which is much more suited for 3D Printing and circumvents the use of a printed screw.
https://www.printables.com/model/238395-jbl-control-one-wandhalterung-halter
Old description:
This is still not perfect and might need much force to screw on. The design is very tough when printed in PLA. I could apply excessive force using pump-pliers without breaking the screw.
The blender file contains the vertice group for the inner threading with its mesh deform modifier. You could easily adapt the mesh transform modifier to make the bottom part even narrower for more early tightening.