Prusa Mini Base
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.65 – €0.79 net (excluding VAT)
For file: cable management.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 55.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This four-legged beast is designed not only to look cool, but also to provide maximum functionality and storage space.
- Rating
- 4.806 / 5
- Likes
- 4,039
- Downloads
- 20,077
- Makes
- 516
- Views
- 105,352
- Reviews
- 458
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Importatnt note: Model will only fit with the Prusa MINI version that has the old Z-bottom plastic part version.
Even though the Original Prusa MINI+ is a compact printer, sometimes you might feel it takes up a little more space than is necessary. We came up with a solution, a relatively simple printed add-on that gives your MINI+ a bit of a majestic presence, while actually saving space and neatly organizing the extras your MINI+ needs, all at the same time.
This four-legged beast is designed not only to look cool, but also to provide maximum functionality and storage space for all the goodies mentioned above.
Please note that you are installing this add-on at your own risk. Any problems or damage caused by the installation are not covered by the warranty.Also, please note, that before packing and shipping the printer for repair, this add-on has to be fully uninstalled.
Material: a combination of Prusament PETG Prusa Orange and Prusament PETG Jet Black.
Total weight: 708 g
Total printing time 4d 0h 16m
full article about Prusa Mini Base you can find on blog:
https://blog.prusaprinters.org/enter-the-mini-base_50290
Buy Original Prusa Min i+:
https://shop.prusa3d.com/cs/66-original-prusa-mini
Buy Prusament PETG:
https://shop.prusa3d.com/cs/23-petg