Piano-string mute for tuning
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print-in-place design is used to mute single strings while tuning the treble section of a piano.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 104
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Print-in-place design - just put it through your slicer and don't worry about supports. All around clearences is around 0.25mm, but I was successfull with my shitty old Ender 3 Pro so you should be able to just pull it open without much force after printing.
(Keep in mind that a big elephants-food will fuse the parts together on the first few layers.)
This tool is used to mute single strings while tuning the treble section of a piano.
The only thing you'll need is a spring that keeps the tension. I've used an old Ender 3 spring for it, the recess for the spring has a diameter of 8 mm, but literally every spring should work if you just glue it in the hole.
I've printed it in PLA, but it should work with every not-soft-material.