1 / 3
Limit Switch Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative Limit Switch Housing for a Sorotec Hobby Line CNC.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 173
- Makes
- 0
- Views
- 894
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An alternative Limit Switch Housing for a Sorotec Hobbyline CNC. It fits directly into the guide profiles with the existing M5 x 8 screws and hammer nuts, the slots leave room for adjustment. The switch (https://www.sorotec.de/shop/Referenz---Endschalter.html) sits tight in the housing. The cable can enter/exit on both sides. The lid is screwed onto the housing with two M3 countersunk screws (thread in the housing is 3D printed as well).
Printed in ABS on a Prusa MK3S.