Small Replacement Gears for Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some small gears 8:22 and a 24 tooth gear for the drive shaft, for a toy that broke. Printed with a 0.2mm nozzle.
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 146
- Makes
- 1
- Views
- 761
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Made and combined a few replacement gears with https://www.stlgears.com/ to repair a toy RC car that has a small 3V DC motor in it.
Priinted with a 0.2mm nozzle, scaling the X and Y in your slicer by 50% since https://www.stlgears.com/ doesn't let me do frational modules. Combined the STL files generated from the STL gears website in FreeCAD by importing them, converting from mesh to shape, creating a solid from the shape, refining the shape, creating a simple copy and then finally fusing two geears together.
There are 4 gears that needed replacing:
The gear attached to the motor, a small 8 toothed gear
Two reduction gears, 22 tooth to 8 tooth gears
The gear attached to the axel, 24 tooth gear