MicroSD cards stronger tab
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of Zsóka's microSD cards tab where I added more 'flesh' to glue the microSD card on.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MicroSD_tab_with_etxtra_flesh.stl This is a remix of Zsóka's microSD cards tab where I added more 'flesh' (an extra tab) to glue the microSD card on. This adds a little extra height, and it could be tight in some SD-card slots.
Print using the concentric pattern for the bottom layer.
I used a 0.2mm layer height
Some SD-card readers/slots can get very hot, so I don't recommend to print in PLA. I used ABS.
MicroSD_tab_flatprint.stl Here I removed the extra tab as I saw that it was sometimes to tight in some SD-card slots. You can use a piece of tape to add some extra strength.