1 / 3
Kia (e-Niro) mobile charger horizontal support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An horizontal support for the original Kia (e-Niro) mobile charger.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 125
- Makes
- 0
- Views
- 737
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An horizontal support for the original Kia (e-Niro) mobile charger.
It was used in combination with the beautiful design by Hegre Engineering to hold the cable and the type 2 connector.
Printing recommendations :
- Filament : PETG, but PLA should be fine if used indoor
- A brim or disk helpers are recommended for PETG
- No support necessary
- I used 2 walls, 20% infill and 4 top and bottom layers with PETG, and it's plenty strong
Necessary components :
- 2 x M4 self-tapping screws
- 2 x M4 compatible screw plugs if attached to a wall