Death Star Diorama Trench Run
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added a new series of the tiles to the Death Star Diorama. Felt it was sorely lacking a trench run section sooo...
- Rating
- 5 / 5
- Likes
- 556
- Downloads
- 1,540
- Makes
- 5
- Views
- 13,723
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really love the set of tiles available for the Death Star I came across a while back but I felt it was really lacking any sort of trench run section so I thought I would expand the tile set just a little bit.
Included are seven (7) new tiles that fit with many of the other sets available. 100% scale is 152.4mm x 152.4mm.
Printed model is at 50% scale (76.2mm x 76.2mm tiles), zero sanding all filler primer, paint and weathering pass or two. Lights are neopixels, firing random bursts of red with a slow fade, shining through frosted plexiglass with a dusting of flat black paint. I also embedded magnets into the turret tower tops so they can be spun around. Everything is mounted onto an MDF panel in a custom made frame. I believe these fit nicely into an ikea frame if a custom frame is not an option.
If you take a close look at “Trench-Run-07” you'll see there is a through hole inside the piece so you can easily light the inside of the exhaust port up.