1 / 4
48 Tooth Spur Gear
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printable Spur Gear with 48 Teeth
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 158
- Makes
- 0
- Views
- 657
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used a set of these gears to repair a Nadir Nove Floor Scrubber after the original plastic gears had a slight accident and broke.
Gear Details
Teeth | 48 |
Thickness | 13.40 mm |
Module | 1.485 mm |
Pitch diameter | 71.30 mm |
Pressure angle | 20 deg |
Bore diameter | 16.40 mm |
Printing suggestions
Print with 5 perimeters or more for the best teeth strength, also increase the infill to 30% for best results.