1 / 1
Cat - Hueforge (Fotis)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
Filaments Used:
PLA+ Esun Black Transmission Distance: ?
PLA+ Esun Magenta Transmission Distance: 4.5
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA Default White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.52mm) swap to Magenta
At layer #12 (0.82mm) swap to Orange
At layer #15 (1mm) swap to Pure Yellow
At layer #20 (1.3mm) swap to White for the rest.