1 / 8
HSW and Magnetic Nose-shaped Glasses Holder — image 1
1 / 8

HSW and Magnetic Nose-shaped Glasses Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of Fourninetysix's Nose-Shaped Glasses Holder that adds HSW and magnetic mounts. Also modded for safety glasses.

Rating
4.4 / 5
Likes
27
Downloads
196
Makes
5
Views
853
Reviews
5

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Public Domain

To combat my tendency to lose safety glasses (and subsequently employ the largely ineffective but commonly used Safety Squints™), I have resolved to put a pair of safety glasses near every work area I commonly utilize. While looking for interesting ways to store these safety glasses on my HSW and workbench, I stumbled across Fourninetysix's wonderful Nose-shaped Glasses Holder. The original model was made to use an adhesive strip for mounting, but I was looking to mount in a more mobile fashion. Luckily, Fourninetysix  provided the Fusion 360 files for easy modification. 

Summary of modifications:

  • Removal of back mounting plate to save on filament and print time. I also think this enhances the overall nosey-ness of the holder.
  • Addition a hexagonal “plug” style insert (see note below) for use with the HSW and magnet slots to accommodate standard 6x3mm rare earth magnets.
    • Magnet slots are 6.2mm in diameter--on my printer, this provided a slot which allowed for relatively easy insertion but didn't allow the magnets to remain behind on whatever you stuck them to. You may need to adjust on your printer based on tolerances (though the holes are vertical, so this is not as large an issue as horizontal holes).
  • Increased model depth ~20mm for use with safety glasses. (Denoted by the addition of “deep” to the filename)

In keeping with the original model, I have posted both the final 3MFs that I am using and the Fusion 360 files. While the HSW insert should be bang on for most printers, the magnet holes can be easily modified to change the position, size, number, etc. of magnets based on what you have on hand.

As far as printing goes, I ran these at a 0.2 mm layer height and 5% infill to cut down on weight and time. No supports needed. 

Down with Safety Squints™, and happy printing!

 

NOTE: Ensure you have a hollow insert on hand when you print the HSW version to avoid the post-print disappointment of not being able to immediately install it.

Tags