1 / 3
Reloading Powder Pan with Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Powder pan with a handle, designed to be a bit deeper than what is typically included with a scale.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 565
- Makes
- 3
- Views
- 1,829
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This powder pan was designed to work with an AMIR/Brifit digital scale from Amazon. (Linked below) However, there are many other brands of scales that look identical or use the same platten. The bottom measures 33mm in diameter and is chamfered so you can check your scale with your calipers to see if it will fit well. Height is 25mm.
Print in orientation in STL. I use auto supports. Print shown in black is Polymaker PolyLite PLA Pro.