XL Wet Palette
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simply a larger DIY wet palette with a magnetic paper holder. Measures 230mm x 230mm.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 40
- Makes
- 0
- Views
- 556
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple large wet palette. There are many like it, but this one is mine. Just kidding, otherwise, I wouldn't have posted it.
Was trying to find ways to limit some of the expenses with miniature painting and decided to DIY a wet palette. I bought these cellulose sponges from Amazon and didn't want to cut them down. I like to have more space than I may or may not need.
Simple design with some chamfers and fillets to keep the footprint down as much as I could for an “XL” palette. Also tried to keep the edges smoother. The palette and paper holder have openings for 5mm x 3mm magnets. The paper holder has little half-oval cut-outs so that water can be added without removing it using a pipette or steady hand if you are brave.
The palette measures 230mm x 230mm so it may not fit on all build plates. One of the photos is the palette on top of a standard sheet of printer paper for size reference.
Printing Suggestions:
I used PLA but other materials would be fine if you wanted to use them for some reason. I used 0.16 layer height so it would be smoother and made sure to have 1.0+ mm top/bottom for smooth surfaces.
Loosely based on the wet palette by David Warboss.