Yin Yang Planter (self-watering)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.29 – €1.57 net (excluding VAT)
For file: Swimmer_bottom_0.15mm_PLA_MK3S_1h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.43 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Experience true balance and peace of mind, with this YingYang planter.
- Rating
- 0 / 5
- Likes
- 126
- Downloads
- 213
- Makes
- 1
- Views
- 1,888
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This yinyang inspired planter comes with water-level indicators and enough space for one or two plants.
If your water level is out of balance, simply refill through the water-level indicators and watch them rise.
Water-Level indicators consist of two parts, the top-part indicates the water-level, while the lower-part will act as a swimmer. Depending on your printer you might want to coat the bottom part with a thin layer of epoxy to make it air/watertight.
I've designed the indicator so you can use a piece of straight 1.75mm filament to connect both parts. Alternatively you can simply use a wooden stick from your last bbq. (up to two mm in diameter).
To print the complete set, you need to print each part twice.
If you enjoyed this print, consider becoming a supporter through my club membership. ;-)