1 / 2
Garden Rake
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rake for the garden. Each tooth can get replaced.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 78
- Makes
- 1
- Views
- 593
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A full-size rake for the garden having 10 tooths. Each tooth can get replaced. The rake is intended to scratch fallen leaves from the ground.
You need to print:
1 x base
10 x tooth
To assembly the rake you need:
The printed parts (see above)
1 x stick wood round having 28 mm in diameter + 1 screw 3mm diameter
20 x screws M3 + 20 washers + 20 nuts M3
I've printed mine in PETG but other materials will also work.
Print- settings:
0,2 mm height
35% infill
The minimum bed-size of your printer must be 235x235 mm.
Happy gardening!