1 / 1
MK2S idler adjustment tool for PLA and TPU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This simple & fast to print tool will help you set the right and identical tension on the 2 idler screws on your MK2S
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This very simple and fast to print tool will help you set the right and identical tension on the 2 idler screws on an MK2S for PLA or TPU.
For PLA, Prusa recommends to set the length to 13mm
For TPU, the second tool will set it to 14.5mm
The 2 objects printed are to be put over the 2 screws.
The small one for PLA
The bigger one for TPU.
Screw until the tool gets slightly compressed. Then you can remove it. You should now have the right setting.